TRELLEBORG O-ring seals

Temperature limit: -60 °C - 325 °C
Pressure limit: 200 MPa

Simple in shape, the O-Ring is most commonly used in static sealing applications where simple, cost-effective leak tight performance is required. O-Rings can be supplied against all internationally ...

Temperature limit: -45 °C - 200 °C
Pressure limit: 35 MPa

The original seal design developed to improve the performance of the O-Ring and Back-up ring used in the MIL-G-5514F grooves. The Turcon® Double Delta® II is a double-acting sealing element ...

Temperature limit: -45 °C - 200 °C
Pressure limit: 60 MPa

The Turcon® VL-Seal® has been developed over the last few years as a new generation, unidirectional rod and piston seal. The design is based on the latest sealing theories and practical experience, tested ...

Temperature limit: -45 °C - 200 °C
Pressure limit: 50 MPa

Turcon® Dual Piston Ring is typically energised by a stainless steel wave-shaped spring.The characteristics of the seal are very low friction, long service life and a controlled leakage over the rings. ...

Temperature limit: -50 °C - 200 °C
Pressure limit: 150,000 Pa

Mechanical Face Seals are a special form of mechanical seals. They are also known under other designations, such as lifetime seals, floating seals, duo cone seals, ...

Temperature limit: -70 °C - 300 °C
Pressure limit: 20 MPa

... comprised of a U-shaped Turcon® ring and metallic energizing finger spring. It offers low friction with no stick-slip, minimized break out force and high wear resistance. Its constrained flange eliminates potential seal ...

Temperature limit: -30 °C - 100 °C
Pressure limit: 40 MPa

Double-acting O-Ring energized seal designed for oscillating moving pistons, rods and shafts. It offers low friction performance in rotary transmission lead throughs and indexing tables.

Temperature limit: -45 °C - 200 °C

The Turcon® Excluder® DC is a solid ring with dual scraper lip contact, activated by an O-Ring, providing excellent scraping performance. The primary lip prevents dust and ice from penetrating the system ...

Temperature limit: 750 °C
Pressure limit: 200 MPa

Wills Rings® are metal seals, supplied in two forms, either O or C cross-sections. Controlled-compression type face seals, for static use only, they are designed for ...

Temperature limit: -30 °C - 200 °C
Pressure limit: 100 MPa

... metal ring resists the pressure bursting forces and limits the deformation of the elastomeric element. This prevents over-compression and extrusion.The standard type Bonded Seal is supplemented by a range ...