TRELLEBORG elastomeric seals

Temperature limit: -60 °C - 325 °C
Pressure limit: 200 MPa

... are available on request. In addition, special O-Rings can be supplied with their flashline in a specified position on the seal or inspected to stringent criteria, if required.

Temperature limit: -60 °C - 325 °C
Pressure limit: 200 MPa

Back-up Rings are commonly used to protect seals from the effects of extrusion when pressurised adjacent to a housing gap. A wide range is available to suit all seals and grooves. Usual configurations ...

Temperature limit: -45 °C - 200 °C
Pressure limit: 35 MPa

The original seal design developed to improve the performance of the O-Ring and Back-up ring used in the MIL-G-5514F grooves. The Turcon® Double Delta® II is a double-acting sealing element which is energized by an elastomer ...

... spiralling or rolling under severe working conditions. The small elastomer contact area of the Wedgpak® design, results in a slipper seal type performance, with low static and dynamic friction. At the same time, the elastomer ...

Temperature limit: -30 °C - 200 °C

The GAMMA Seal is an axial rotary seal that excludes contamination, moisture and grease. It consists of an elastomer sealing lip contained in a metal carrier. This design copes with arduous static and ...

Temperature limit: -50 °C - 200 °C
Pressure limit: 150,000 Pa

Mechanical Face Seals are a special form of mechanical seals. They are also known under other designations, such as lifetime seals, floating seals, duo cone seals, ...

Temperature limit: -30 °C - 200 °C
Pressure limit: 1 MPa

... within the seal width or beyond the seal base. A successful Radial Oil Seal runs with a thin film of fluid under the sealing lip. The film acts as a lubricant and allows a meniscus to ...

Temperature limit: -30 °C - 200 °C
Pressure limit: 50 MPa

... areimportant.Kantseals can be compression molded or machined and additionalcorner chamfers or radii can be used to alter the seal's frictionalbehavior.Available in a full range of elastomer materials compatible withalmost ...

Temperature limit: -150 °C - 200 °C
Pressure limit: 60 MPa

... load of the helical spring ensures effective sealing even in extremely low temperature applications. These helical spring seals are ideal for slow moving and static applications or in a vacuum sealing applications.The ...

Temperature limit: -30 °C - 200 °C
Pressure limit: 100 MPa

... bursting forces and limits the deformation of the elastomeric element. This prevents over-compression and extrusion.The standard type Bonded Seal is supplemented by a range of self-centering Bonded Seals ...