Floor grinder

The Grinder Hog is mounted to a Peterbilt 520 chassis and features a grinder head on each side of the truck that is capable of extending outward up to 36” from the chassis. The grinder head supports PCD teeth available in full round, double round, and full flat for different profile adjustments. With our Low-Speed Control, the Grinder Hog can grind at speeds up to 8 MPH (12.87 KPH) without having to check between the crosshairs and the speedometer, greatly reducing the margin for error. The Grinder Hog comes with a skip line control system for on-the-fly adjustment of grinding patterns. The Grinder HOG is available with either 3 or 4 grinding heads. The simultaneous vacuum recovery system of the Grinder Hog utilizes two 8” 2,200 cfm Roots Blowers, double filtration, and an ultra-quiet Hog Silencer to collect debris at the same time as grinding. The debris is then stored in a 1,600 gal (6,056 liters) debris tank that can be tilted at a minimum of 47 degrees for easy debris dumping. The Grinder Hog also comes with a standard 1,000 gal (3,785 liters) water tank that can be filled with fresh, potable water for dust control while grinding, keeping the machine compliant with Airborne Silica guidelines set forth by the EPA. With the Grinder Hog's Master/Follower function, one operator can run all heads and maintain exact lane width. Sonic Vibration Technology: Over 500 Sq Feet of Filtration with auto-reverse air pulsing (Short pulse provides cleaning your filters while grinding) / Long Pulse w/Sonic vibration helps to restore air flow). Positive Displacement Blowers provide up to 6,600 CFM at 15" Hg