Grey water aircraft drain mast

heated

Waste Water Drain Mast with Anti-Icing: The drain mast is an on-board solution for pulverization of grey water from the lavatory out of the airplane or helicopter. Equipped with anti-icing solution makes the drain mast safe when used during flight. We have the drain mast with anti-icing for rear and middle position on the fuselage. We offer anti-icing with self-regulated technology or regulated by switches Our cable technology allows the water pipes and not the shell to be heated, for the most efficient anti-icing result. The self-regulated anti-icing version can be lighter compared with a regulation by switches. The anti-icing cable is shaped around the water pipes. For better conductivity and to withstand flying conditions, cables and pipes are brazed together. The power is defined as a function of the power supplied on the aircraft and the outer casing is designed to have a good anti-icing system Key Parameters Anti-Icing Drain Mast: anti-Icing - Drain Mast Heating design: self-regulated or regulated by switches Thrue Cold Ends -60°C T +85°C ambient temperature Load in all directions 400 Newtons -2000 to + 41 000ft Mach 0.9 Power Supply: 28 Vcc or 115 Vac 400Hz Dielectric 1500Vac Power up to 50 watt for small size Power up to 300 watt for large size Temperature switch for security Composite Shell Weight < 1000 gr Qualification to RTCA DO 160 / MIL