Test software

weight and balance analysefor the aerospace industryreal-time

Balancing Single, Dual and Multiplane Vibration Balancing Overview OROS Balancing Solutions are software modules for balancing rigid and flexible rotors. These modules are well-suited for shop balancing or in-situ field balancing. They are designed to run on OROS analyzers. 2 modules are available: The Single/Dual plane software module is particularly suited for shop or field balancing of rotors operating in their rigid body region (well below their first critical speed). The Multiplane software module is designed to balance rotors above the first critical speed: meaning in the region where the rotor deforms and reaches its first bending mode. Main Features Acquisition from a wide range of OROS 3-Series instruments Accepts signals from accelerometers, velocimeters or proximity probes Up to 32 sensors depending on the instrument platform Real-time data for the balancing operation (1X amplitude and phase) High phase accuracy (6.4 MHz oversampled tach) Flexible weight map configuration with correction mass split or by step of 1 Add or remove weight by drilling Prognostics of residual vibration (“what if” feature) Trim balancing Single/Dual Plane Balancing 1 or 2 balancing planes Rigid rotors 1 to 4 sensors (1 or 2 per bearing) Real time acquisition and 1X polar diagram (amplitude and phase) Steady state speed acquisition Acceptance of residual unbalance according to ISO 1940 / Balancing quality selection Size and weight: optimum size with OR34. Runs on the 3-Series instruments’ platform Trim Balancing Report generation Designed for non-experts