Surveyor-I is a fully autonomous Mini Unmanned Fixed Wing aircraft. It is capable of carrying a 400 Gram payload and is ideally suited for surveying work. The payload is a day still camera. Most high quality cameras are under 400 Grams. The UAV is electrically power with a very low dB level. The aircraft is autonomous right from Takeoff to Landing. For ease of operation the aircraft is capable of hand launch and normal ground landing. Catapult or arrester net is not required. The UAV airframe is made of Elasto-Polymer foam and Carbon Fiber Composites.
Physical Specifications:
Wing Span - : - 1800mm
Length - : - 1200mm
Height - : - 150 mm
Flying Weight - : - 2500gms
Propulsion - : - 350Watt BLDC Motors @11.1 Volt
Propeller - : - 11x5 Fiber Reinforced Nylon
Flying Battery - : - Lithium-Ion 11.1 Volt, 13000mAh, Discharge @ 30A.
Flying Characteristics:
Range - : - 10KM*
Accuracy - : - Within 10 meters of programmed waypoint
Cruise Speed - : - 48 Km/Hr
Max Speed - : - 60 Km/Hr
Stall Speed - : - 35 Km/Hr
Max Winds - : - 20 Km/Hr.
*Total Distance Traversed: 48Km
Capabilities:
Fully Autonomous from Takeoff to Landing.
Can be programmed for 300 Waypoints/Mission Commands.
Can ‘Loiter’ over the subject at any waypoint.
Has Manual over ride at any stage.
Can be ‘Guided’ to specific location during flight by clicking over map.
Can activate/deactivate any payload from the GCS.
Auto payload activation on reaching the waypoint.
Failsafe built in.Will ‘RTL’ if link is lost. Will ‘Land’ if battery is low.
GCS switchable navigation lights.