Air pump Model 82

3 - 10 barfor aircraft

Applications Rack mount pressure source Rack mount vacuum source Desk top pressure/vacuum source Pressure/vacuum source for avionics instruments Key Features Shock mounted to reduce noise and vibration Separate power switch/breaker For avionics applications capable of vacuum to produce 60,000 feet of altitude Capable of producing pressure for airspeeds in excess of 1000 knots Description Description The Mensor Model 82 is a pump and/or compressor set that complements a pressure controller and fits on or under a bench, in a rack, or on a table. The compressor is an oil-less pump with a maximum pressure of 50 psi with a open flow of 1.5 cfm. The vacuum pump is also oil-less and can achieve 28.5 inHG of vacuum with an open flow of 0.8 cfm. In avionics terms, this set is capable of 60,000 feet of altitude and airspeeds in excess of 1000 knots. Both units are shock mounted to reduce noise and vibration. Each unit has a power switch/breaker and can be run independently. This same configuration can also be produced in a standard 19 inch, 4U (7” high) rack mount chassis or desktop version. Operation Operation of the vacuum channel, pressure channel or both channels can be initiated by applying power using the power switch/breakers on the front panel. The 110 volt AC unit requires nominal 110 volt AC, 60 Hz power be applied using the rear power cord. The 230 volt AC unit requires 220 to 230 volt AC, 50 Hz power. Voltages should vary less than plus or minus 10% of rating.