Aircraft paint F80

varnishedliquidspray

Two-component epoxy varnish with a high chemical resistance. F80 Varnish is used to stop kerosene tanks vapors. It can be applied with a spraygun or with a brush or a foam in the case of repairs. (*Contact our Pamiers site for more information.) Gloss Level 20-80 GU below 60° Delivery Method Solventborne Coverage 2.1 m²/L (35 ft²/gal) for 300 µm (12 mils) dry OEM/Specifier & Specs Qualified OEM/Specifier Specs Qualified Airbus Industries AIMS 04-04-008 This product may be used in combination with some of the following products Qualified in accordance with: Airbus: AIMS 04-04-008 Product information mentioned in the technical datasheet is given for information purposes and can differ from requirements of specifications above. In that case, customer requirements are valid for your application. THEORETICAL COVERAGE 2,1 m²/L (35 ft²/gal) for 300 µm (12 mils) dry DRY FILM WEIGHT 1.1 VOC 315 g/L (2.6 lbs/gal) according to ASTM D3960 and ISO 11890-1 COLOR Transparent SHELF LIFE / STORAGE 12 months for base and hardener stored between 5°C and 35°C (41°F and 95°F) in full and sealed original packaging. GLOSS LEVEL 20-80 GU below 60° NOTES Gloss levels have been determined using glossmeter with an angle of incidence of 60°C. The theorical consumption value doesn’t take into account the transfer efficiency for spray application. F80 Varnish is fully compatible with structural proctection systems such as P60-A Primer and F70-A topcoat, and with F69 direct adhesion topcoat as well. For an application on fully cured primer, it is necessary to reactivate the surface with a light abrasion, and then clean with alcohol or Diestone DLS.