Epoxy adhesive Redux® 100 series

for aeronauticsfor bonding

When sprayed, 1 kg of HexBond™ surface pretreatment protection solution should cover at least 20 m2(HexBond™ 112) or 30 m2 (HexBond™ 119, 122) of pretreated light alloy surface. The weight of this coating when dried is approximately 5 g/m2- limits: 2 to 12 g/m2. Spray application tests are carried out using a DeVilbiss Pri Pro spray gun with a Pri Pro 210-18 nozzle (1.8mm). Drying Coated parts should be allowed to dry thoroughly in a well ventilated area before being handled. At room temperature (20-25°C) this should take approximately 1 hour. Alternatively, they may be dried in a well-ventilated flame-proof oven or drying tunnel, as follows When the parts are dry they can be set aside to await bonding, in which case they should be covered with clean paper or polythene to prevent dust or moisture accumulating on the bonding areas. If the parts are to be bonded on the same day as the solution is applied, they should be dried at the elevated temperature indicated above. Parts that have been coated with a HexBond™ 100 series solution at the end of a working day may safely be bonded the next morning after standing overnight at room temperature. Cleaning Equipment used with the HexBond™ 100 series may be cleaned as follows Storage HexBond™ 100 series solutions should be stored in their original unopened containers at the temperatures indicated in the table below. This table also indicates storage life, and additional out-life per product