10 - 50hp piston engine DA 170 EFI

0 - 10kgfor drone2-stroke

DA 170 EFI UAV Engine by HFE International comes complete with state of the art electronic fuel injection. The fuel injection provides operators the correct amount of fuel and spark advance during hi-performance 3D flights. The ECM is powered by a single 3 cell Lipo battery of 1500mah or larger capacity. Total power draw is only 12 watts(1 amp) at full throttle. The system is tested from sea level to 10,000 ft altitude and temperatures ranging from 10°F to 120°F. Custom alternator options are available upon request. Choose from the following alternator options, below. Custom options are also available upon request. 500W Starter Alternator This 3 phrase brushless alternator direct drives on the engine crankshaft. The stator mounts to the crankshaft casing with the rotor spinning on the crankshaft. The system includes a 500 W Power Management Unit with an integrated starter controller, allowing the engine to start remotely. The PMU provides three lines with a chosen voltage in the range: 24 – 28 VDC at 12.5A or 350W max, 12 – 15 VDC at 9A or 108W, and 4.8 – 8 VDC at 8A or 42W. Configurable with LiIon, LiPo, LifePO4, SLA, NiCad, NiMH, and Lead Acid Battery. Lead Time - 4 -8 weeks Displacement - 170 cc, 10.37 ci Weight (ECM) - 98 g, 3.45 oz Weight (Fuel Pump) - 150 g, 5.29 oz Standard Operating Speed - 1,700 RPM to 7,000 RPM Voltage - 10 V to 15 V Power Draw - 1 Amp peak, 1 hour/1,000 mAh Temperature Range - -12° – 49° C, 10° – 120° F