Completely refurbished semi-automated edge polisher. In perfect conditions.
The AM-2 model is equipped with standard equipment allowing flat surfaces to be polished at 90º.
The machine operating system is based on a cycle in which the moving head of the cutter runs along a working table on which parts have been secured previously by pneumatic hold down clamps spread out along the table. These clamps can work on parts at different heights during the same operation.
The polishing head is equipped with a rear regulator used to adjust the depth of the run with a high degree of accuracy, to the nearest hundredth.
In order to align the parts with the cutter, the table is equipped with a special screen, which is lowered before the cycle begins. Once the parts have been adjusted, the clamps go down, the screen retracts and the automatic machine cycle starts.
TECHNICAL SPECIFICATIONS:
The main mechanical specifications of the AM-2 model are as follows:
AM2 dimensions 000 mm x 1.350 mm x 1.330 mm
Working length 400 mm
Maximum thickness 90 mm
Cut depth from 0.05 / 5 mm
Variable feed speed from 0 to 3.5 m/min
Total installed power 2 kW
Feed power 1 HP / 0.75 kW
Standard number of clamps 5 clamps
Air pressure 6 Kg./cm2
Suction diameter 100 mm
Weight 900 kg
Weight with packing 100 kg
Packing dimensions 260 mm x 1.354 mm x 1.587 mm
Front safety protection: polycarbonate transparent cover
Machine colour RAL 7040
Applications:
Polishing of methacrylate displays
Displays for cosmetics, etc.
Methacrylate decorative elements
Elements for stands
Gift objects and costume jewelry