Runway light WAGGY

for airportLEDhigh-intensity

Airfield Lighting Systems WAGGY LED high intensity runway guard light, 6.6A or 230VAC. One of the installations required for prevention of runway incursions is the Runway Guard Lights (RGL), also referred to as “Wig-Wag”. These should under certain conditions be installed on every taxiway connected to the runway as the last resort to remind a flight crew that they must have a clearance to continue before entering an active runway. The elevated Runway Guard Light WAGGY is the answer to these problems. Based on a new generation of LEDs and a revolutionary design both in size and light output, WAGGY is a perfect choice, it also has a specific flashing pattern exhibiting crisp ON and OFF status. Section 4.2.2 Elevated Luminaires The overall height of an elevated luminaire intended to be used within the runway or taxiway safety area shall not exceed 350mm above pavement except for heliports where the height limit shall be 250mm. In case of RGL, the height shall not exceed 650mm. These heights could be increased with the approval of the competent aerodrome authority. We offer two models of the RGL, one as below with low profile frangible brackets. Features Designed and built with simplicity and ease of maintenance in mind. High power LED technology. Lightweight, low-energy and environmentally-friendly lighting fitting. Extensive use of aluminium alloys reduces fitting weight and eases handling in the field. Environmental Data Aspect Data Temperature Range -40° to +50⁰ Degree of Protection IP65 Humidity 0-100% Wind Speed Up to 480 Km/h