Smart card reader 9160344 series

RFIDfor access controlfor airport

Thanks to our own RFID chip, the 2N® Access Unit 2.0 RFID reads almost all cards on the market. Quickly, reliably and on both frequencies – 125 kHz and 13.56 MHz. This comes in handy when you don’t want to spend money on cards. Give users the option of using one of the cards they already have in their wallet. Installation will take you only a few minutes, all you need to do is connect an ethernet cable. Interfaces Power supply: - PoE and/or 12 V/1 A DC PoE: - 802.3af (Class 0–12.95 W) LAN: - 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack Recommended cabling: - Cat-5e or better Active switch output: - 8 to 12 V DC/max 600 mA Passive switch: - NO/NC contacts, up to 30 V/1 A AC/DC Inputs: - 2 inputs - in passive/active mode (-30 V to +30 V DC) OFF = open or Uin> 1.5 V ON = short-circuit or Uin< 1.5 V Tamper switch: - native part of the 2N Access Unit 2.0 Audio: - buzzer (97dBA) Supported protocols: - DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog RFID Card Reader Supported frequencies: - 125 kHz and 13.56 MHz variant Supported card types: - card type compatibility depends on Order No. 125 kHz: - EM4100, EM4102 HID Prox - Secured version only 13.56 MHz: - ISO14443A, ISO14443B, NFC support reads UID (CSN) reads PACs ID (HID iClass cards with SIO object) - Secured version only