V accelerometers

Frequency: 300 Hz

The JA-80GA accelerometer provides a high accuracy, cost effective measurement solution for industrial grade applications. The JA-80GA has been designed specifically for -55 to +96℃ operation whilst providing excellent ...

The Meggitt (Sensorex) SX41800 is a high performance digital RS485 (MODBUS) servo- accelerometer designed to deliver an output proportional to an acceleration. The incorporation of an optical infrared sensor and an ...

Meggitt (Sensorex) SX41170 servo-inclinometer/ accelerometer is DC in/ DC out single axis inclination sensor. The output is proportional to the sine of the angle. This inclinometer/ accelerometer ...

The Meggitt (Sensorex) SX41400 is a dual axis closed loop inclinometer/ accelerometer, offering angular tilt or acceleration measurements in two perpendicular axis. Rugged, watertight IP 65 sealed housing and hydro-mechanical ...

Acceleration range: 4,905 m/s²
Frequency: 1.1 Hz - 5,000 Hz

The Dytran model 3077A is an IEPE piezoelectric accelerometer, designed expressly for Rotor, Track and Balance (RTB) and other high frequency aircraft vibration monitoring applications. Offered with a sensitivity of ...

Acceleration range: 4,905 m/s²
Frequency: 1.1 Hz - 5,000 Hz

Expressly designed for use in Health and Usage Monitoring Systems (HUMS), the Dytran model 3078A is an IEPE piezoelectric accelerometer, featuring a sensitivity of 10 mV/g with a frequency response of 0.7 to 5,000 Hz, ...

Acceleration range: 49,033 m/s²
Frequency: 0.6 Hz - 33,000 Hz

The Dytran series 3220 is a low profile, high frequency ring shaped IEPE accelerometer offered with various sensitivities and an overall weight of just 2.7 grams. Featuring a quartz shear sensing element encased in ...

Frequency: 3,000 Hz - 17,000 Hz

The Dytran series 3316 is an ultra–high–temperature piezoelectric accelerometer, designed to reliably operate in temperatures up to +1000°F (+538°C) with charge mode capabilities. Featuring a unique single crystal ...

Acceleration range: 2,942 m/s²
Frequency: 1 Hz - 20,000 Hz

The Dytran model 3433A1 is a low power, triaxial IEPE accelerometer with a 5 mV/g sensitivity and an overall weight of 14 grams. Featuring a bias voltage from +1.5 to +3.0 VDC, the Dytran model 3433A1 was designed ...

Frequency: 100 Hz

... description of the ProAccel® triaxial accelerometer is ACCURACY. Scale factor, bias and alignment have all been optimized far beyond the performance of the usual MEMS accelerometer. There is no better ...

Acceleration range: 9,807 m/s² - 98,067 m/s²
Frequency: 0 Hz - 50,000 Hz

Strain gauge accelerometer ARE-A - Measurement range: ±1000 to ±10.000g - Non-Linearity: ±1.0%RO - Output: 0.5mV/V (1000×10 strain) - Operating temperature: -10°+50°C - Frequency response: Up to 50.000Hz ARE-A ...

Acceleration range: 9,807 m/s² - 49,033 m/s²
Frequency: 0 Hz - 2,100 Hz

... measurements Slightest interference Degrees of protection: IP61 equivalents About the ARF-A-T Low Capacitance Triaxial Accelerometer The ARF-A-T acceleration transducer measures acceleration in three directions ...

Acceleration range: 98 m/s² - 4,903 m/s²
Frequency: 0 Hz - 520 Hz

... and lightweight Measurement on the DC level. Degrees of protection: IP61 equivalent About the ARF-A Low Capacitance Accelerometer The ARF-A acceleration transducer is used to measure the acceleration of structures ...

Acceleration range: 196 m/s² - 4,903 m/s²
Frequency: 0 Hz - 520 Hz

... measurements Slightest interference Degrees of protection: IP61 equivalents About the ARF-A-T Low Capacitance Triaxial Accelerometer The ARF-A-T acceleration transducer measures acceleration in three directions ...

Acceleration range: 98 m/s² - 4,903 m/s²
Frequency: 0 Hz - 520 Hz

... and lightweight Measurement on the DC level. Degrees of protection: IP61 equivalent About the ARF-A Low Capacitance Accelerometer The ARF-A acceleration transducer is used to measure the acceleration of structures ...

Acceleration range: 98 m/s² - 4,903 m/s²
Frequency: 0 Hz - 520 Hz

Strain gauge accelerometer ARJ-A - Measurement range: ±10 to ±500g - Non-Linearity: ±1.0%RO - Output: 0.5mV/V (1000×10-6 strain) - Operating temperature: -10°+50°C - Frequency response: Up to 520Hz ARJ-A- ...

Acceleration range: 490 m/s² - 19,613 m/s²
Frequency: 0 Hz - 2,000 Hz

Strain gauge accelerometer ARJ-A-D - Measurement range: ±50 to ±2000g - Non-Linearity: ±1.0%RO - Output: 0.5mV/V (1000×10-6 strain) - Operating temperature: -10°+60°C - Frequency response: Up to 2000Hz ARJ-A-D ...

Acceleration range: 490 m/s² - 19,613 m/s²
Frequency: 0 Hz - 2,000 Hz

Strain gauge accelerometer ARJ-A-T - Measurement range: ±50 to ±2000g - Non-Linearity: ±1.0%RO - Output: 0.5mV/V (1000×10-6 strain) - Operating temperature: -10°+60°C - Frequency response: Up to 2000Hz ARJ-A-T ...

Acceleration range: 9,807 m/s² - 19,613 m/s²
Frequency: 0 Hz - 3,000 Hz

Strain gauge accelerometer ARK-A - Measurement range: ±1000 to ±2000g - Non-Linearity: ±1.0%RO - Output: 0.5mV/V (1000×10-6 strain) - Operating temperature: -10°+50°C - Frequency response: Up to 3000Hz ARK-A ...

Acceleration range: 981 m/s² - 3,923 m/s²
Frequency: 0 Hz - 200 Hz

Strain gauge accelerometer ARM-A-T - Measurement range: ±100 to ±400g - Non-Linearity: ±1.0%RO - Output: 0.5mV/V (1000×10-6 strain) - Operating temperature: -10°+60°C - Frequency response: Up to 200Hz ARM-A-T ...