Thermoplastic paint striping machines

Volume : 350 l
Flow: 5,400 l/min

We gladly develop customised road marking trucks matching national, climatic and technical requirements.Here only a small selection from our large range of individually developed road marking trucks.

Volume : 160 l
Flow: 2,800 l/min - 3,500 l/min

... ventilator speed to ambient temperature and machine load (noise reduction at normal machine load and higher cooling performance at extreme machine load).Inlet of whole cooling air from ...

Volume : 160 l
Flow: 2,400 l/min

... construction machine axle with hydraulically switchable speed ranges combined with a high-speed hydraulic motorCooling system with automatic adaption of ventilator speed to ambient temperature and machine ...

Flow: 1,300 l/min - 2,000 l/min

... temperature and machine load (noise reduction at normal machine load and higher cooling performance at extreme machine load) Inlet of whole cooling air from upper side of the machine ...

Flow: 0 l/min - 470 l/min

... or left rear wheel). No dangerous acceleration on the external outside of the curve. Optimal visibility conditions during marking operation. Perfect loading facility. Line widths: 10 up to 30cm (dependent on equipment)

... compartment easily accessible for service workExcellent panoramic view, also when driving backwardsDue to its low weight the machine can be easily transportedLine widths:10 up to 60 cm (dependent on equipment)

... base and front wheel steering system with zero backlash for best roadability and excellent handling, especially wherever the marking results depend on high manoeuvrabilityApplication units favourably mounted in the back ...

Volume : 20 l
Flow: 320 l/min

Infinitely variable hydraulic drive unit Uniform drive of rear wheels by differential drive Fixing for marker unit right and left side Low noise emission; important in urban areas Double-line equipment: optional Indirect and careful ...

Sliding skids with hard metal surface Easy handling, especially in bends and turns due to flexibly mounted screed box Constant line thickness adjustable at screed box Easy operation by means of a lever system Glass bead dispenser, ...

Volume : 20 l
Flow: 600 l/min

Container and gun indirectly heated by heat transfer oil which is heated by LPG Distance between gun and road surface adjustable Glass bead dispenser: optional Line widths: 10 up to 30 cm

Volume : 800 l
Flow: 1 m³/h

... mm Line guide - connected to stearing, pneumatic lifting Compressor - Boge, effective air supply 1,3 m³/min at 7 bar Thermoplastic preheater - 2x 1.200 ltr., with agitator Thermal oil heating - on request gas or diesel Hydraulic ...

Volume : 500, 300 l
Flow: 4 m³/min

Truck type - Mercedes Benz ATECO 1523 Wheel base - 4160 mm Line guide - connected to stearing, pneumatic lifting Compressor - Kaeser Typ M42, Thermal oil heating - on request gas or diesel Glass bead pressure tank - 2x 120 ltr., ...

Volume : 600 l

... effective air supply 1465 l/min, mechanically driven by poly-v-belt Operating air pressure - 7 bar, silenced safety valve Thermoplastic container - with agitator, other container capacities on request Thermal oil ...

Volume : 440, 410 l

... air pressure - 7 bar, silenced safety valve Paint pressure tank - with agitator, other container capacities on request Thermoplastic container - with agitator, other container capacities on request Paint ...

Volume : 400 l
Flow: 2,300, 1,500 l/min

... Boge screw type compressor, mechanically driven by poly-v-belt, Operating air pressure - 7 bar, silenced safety valve Thermoplastic container - with agitator, other container capacities on request Thermal oil heating ...