Rods polyethylene

Operating temperature: 0 °C - 82 °C

Proteus® & Sanalite® are a family of polyethylene and polypropylene shapes that exhibit a high strength-to-weight ratio, excellent chemical resistance, low moisture absorption, and high performance in thermoforming and ...

Operating temperature: 65 °C - 120 °C

Ertacetal® / Acetron® is family of acetals with greater dimensional stability than polyamides despite having a lower wear resistance. Mitsubishi Chemical Group offers both homopolymer and copolymer grades of POM. Special formulations ...

Operating temperature: 65 °C - 120 °C

Ertalyte® is a family of unreinforced, semi-crystalline thermoplastic polyester based on polyethylene terephthalate (PET-P) products. The specific properties of virgin crystalline PET make it especially suitable for the ...

Operating temperature: 65 °C - 120 °C

Flextron™ Thermoplastic Elastomer (TPE) shapes excel in applications where superior performance over conventional elastomers is required. These TPE materials exhibit excellent chemical resistance properties, while maintaining consistent ...

Operating temperature: -15 °C - 120 °C

... longer and smoother. TIVAR® Arctic is a modified, revolutionary lining material based on an extremely high molecular weight PE matrix. While subzero temperatures can cause bulk materials to freeze to traditional UHMW-PE ...

Operating temperature: 120 °C - 230 °C

Duratron® Polyetherimide (PEI) is family of transparent amber high-performance polymers that combine high strength and rigidity at elevated temperatures with long term heat resistance. PEI offers excellent dimensional stability combined ...

Thickness: 10 mm - 50 mm
Diameter: 10 mm - 180 mm

A hard rigid thermoplastic with low coefficient of friction and high creep resistance. Wear performance similar to extruded nylon types 6 and 66. Comparable to acetal in its dimensional stability, chemical resistance and low water absorption. ...

Thickness: 1 mm - 30 mm
Diameter: 10 mm - 500 mm

... friction, good abrasion and chemical resistance. Good mechanical and electrical properties. Colour: Natural and BlackSize range:-Rod - 10 to 500mm diameter.Sheet - 1 to 30mm thick.Tube - Not available.

Thickness: 10 mm - 100 mm
Diameter: 10 mm - 300 mm

... cold, stress cracking, wear, abrasion and shock. Also has higher tensile strength and is lighter. Colour: NaturalSize range:-Rod - 10 to 300mm diameter.Sheet ? 10 to 100mm (Pressed).Tube - Not available.

Thickness: 8 mm - 70 mm
Diameter: 10 mm - 200 mm

... cold, stress cracking, wear, abrasion and shock. Tensile strength lower than Type 500. Colour: Natural and BlackSize range:-Rod - 10 to 200mm.Sheet - 8 to 70mm thick.Tube - Not available.