Rods polyamide

Operating temperature: 65 °C - 120 °C

... applications, and ideal replacements for materials ranging from bronze to rubber. Our comprehensive range of semi-crystaline polyamide materials includes special formulations for demanding applications requiring extremely ...

Operating temperature: 230 °C - 450 °C

Duratron® PAI is a family of the highest performing, melt processable plastics, characterized by superior resistance to elevated temperatures. These plastic grades are capable of performing under severe stress conditions at continuous ...

Operating temperature: 230 °C - 425 °C

Semitron® PAI is a portfolio of polyamide imide materials developed for extremely demanding applications in semiconductor and electronic device manufacturing, such as high voltage ranges, high temperatures, and vacuum ...

Thickness: 0 mm - 100 mm
Diameter: 6 mm - 320 mm

... extrudedGeneral purpose grade. Tough and mechanically strong. Good impact and wear resistance. Colour:- NaturalSize range:-Rod - 6 to 320mm diameter.Sheet - 0.3 to 100mm thick.Tube - 25 to 260mm outside diameter; 3.5 to 65mm wall.

Thickness: 10 mm - 100 mm
Diameter: 50 mm - 500 mm

Improved hardness and stiffness. High compressive and flexural strengths. Colour:- WhiteSize range:-Rod - 50 to 500mm diameter.Sheet - 10 to 100mm thick.Tube - 50 to 6O0mm outside diameter; 10 to 185mm wall.

Thickness: 2 mm - 50 mm
Diameter: 4 mm - 200 mm

... resistance. Excellent stiffness and hardness. Lower impact strength. Machines better than Type 6 extruded. Colour: IvorySize range:-Rod - 4 to 200mm diameter (or ground to size}.Sheet - 2 to 50mm thick.Tube - 25 to 260mm ...

Diameter: 6 mm - 260 mm

... resistance. Excellent stiffness and hardness. Lower impact strength. Machines better than Type 6 extruded. Colour: BlackSize range:-Rod ? 6 to 260mm diameter (or ground to size).Sheet - Not available.Tube - 25 to 260mm ...

Thickness: 20 mm - 50 mm
Diameter: 20 mm - 125 mm

... . Excellent stiffness and hardness. Lower impact strength. Machines better than Type 6 extruded. Colour: NaturalSize range:-Rod - 20 to 125mm diameter.Sheet - 20 to 50mm thick.Tube - Subject to special enquiry.

Thickness: 8 mm - 100 mm
Diameter: 10 mm - 500 mm

Self-lubricating nylon with non-toxic lubricant built-in during casting. This lubricant becomes an integral part of the material and will not spin, drain or dry out. Conventional nylons are excellent bearing materials but the oil filled ...

Thickness: 3, 6 mm
Diameter: 2 mm - 1,250 mm
Operating temperature: -40 °C - 160 °C

Semi-crystalline thermoplastic Special properties Good toughness Very good noise and vibration absorption Very good sliding properties high absorption of moisture of up to 3 % in standard atmosphere High abrasion resistance high ...

Diameter: 2 mm - 500 mm
Operating temperature: -20 °C - 160 °C

PA 6 semi-crystalline thermoplastic With SUSTAMID 6 FR Röchling offers a semi-finished extruded products made of flame-retardant polyamide 6 (PA 6). This material, which meets the relevant requirements ...

Thickness: 3, 6 mm
Diameter: 2 mm - 1,250 mm
Operating temperature: -30 °C - 170 °C

Semi-crystalline thermoplastic Special properties Good dimensional stability Very good sliding properties Suitable for contact with foodstuffs according to (EC) No. 1935/2004 high absorption of moisture of up to 2.7 % in standard ...

Thickness: 3, 6 mm
Diameter: 2 mm - 1,250 mm
Operating temperature: -20 °C - 200 °C

Special properties Good dimensional stability High hardness and rigidity Very high heat deflection temperature high absorption of moisture of up to 2.7 % in standard atmosphere Typical areas of application Mechanical engineering ...

Operating temperature: -200 °C - 290 °C

BEST Thermoplastic material solution in wear resistance under high load.