Polyethylene

Operating temperature: 0 °C - 82 °C

Proteus® & Sanalite® are a family of polyethylene and polypropylene shapes that exhibit a high strength-to-weight ratio, excellent chemical resistance, low moisture absorption, and high performance in thermoforming and ...

Operating temperature: 160 °C - 180 °C

RCH® 500 High Molecular Weight HMW-PE is a highly versatile, high-molecular weight plastic that is ideal for many orthotic applications. It has a forming temperature between +160°C to 170°C , is suited for deep-drawing and is both malleable ...

Operating temperature: 0 °C - 65 °C

... essentially any type of PE is suitable for shielding against high energy neutron radiation, borated PE moderates both fast neutrons and lower energy thermal neutrons. Borotron® HM015 shapes are made ...

Operating temperature: -100 °C - 80 °C

... family of polymers, polyethylene is one of the most widely-used plastics in the world. A common type is high-molecular weight polyethylene (HMW-PE). In less demanding applications with respect to ...

Operating temperature: 65 °C - 120 °C

Ertacetal® / Acetron® is family of acetals with greater dimensional stability than polyamides despite having a lower wear resistance. Mitsubishi Chemical Group offers both homopolymer and copolymer grades of POM. Special formulations ...

Operating temperature: 65 °C - 120 °C

Ertalyte® is a family of unreinforced, semi-crystalline thermoplastic polyester based on polyethylene terephthalate (PET-P) products. The specific properties of virgin crystalline PET make it especially suitable for the ...

Operating temperature: 65 °C - 120 °C

Flextron™ Thermoplastic Elastomer (TPE) shapes excel in applications where superior performance over conventional elastomers is required. These TPE materials exhibit excellent chemical resistance properties, while maintaining consistent ...

Operating temperature: -15 °C - 120 °C

... longer and smoother. TIVAR® Arctic is a modified, revolutionary lining material based on an extremely high molecular weight PE matrix. While subzero temperatures can cause bulk materials to freeze to traditional UHMW-PE ...

Operating temperature: 120 °C - 230 °C

Duratron® Polyetherimide (PEI) is family of transparent amber high-performance polymers that combine high strength and rigidity at elevated temperatures with long term heat resistance. PEI offers excellent dimensional stability combined ...

Thickness: 10 mm - 50 mm
Diameter: 10 mm - 180 mm

A hard rigid thermoplastic with low coefficient of friction and high creep resistance. Wear performance similar to extruded nylon types 6 and 66. Comparable to acetal in its dimensional stability, chemical resistance and low water absorption. ...

Thickness: 1 mm - 30 mm
Diameter: 10 mm - 500 mm

Lightweight, with negligible water absorption and non-stick properties. Low coefficient of friction, good abrasion and chemical resistance. Good mechanical and electrical properties. Colour: Natural and BlackSize range:-Rod - 10 to 500mm ...

Thickness: 10 mm - 100 mm
Diameter: 10 mm - 300 mm

Improved resistance to cold, stress cracking, wear, abrasion and shock. Also has higher tensile strength and is lighter. Colour: NaturalSize range:-Rod - 10 to 300mm diameter.Sheet ? 10 to 100mm (Pressed).Tube - Not available.

Thickness: 8 mm - 70 mm
Diameter: 10 mm - 200 mm

Further improved in resistance to cold, stress cracking, wear, abrasion and shock. Tensile strength lower than Type 500. Colour: Natural and BlackSize range:-Rod - 10 to 200mm.Sheet - 8 to 70mm thick.Tube - Not available.

Diameter: 10 mm - 50 mm

Since its commercialization, HMPE has been broadly used for numerous applications. It has proven to be resistant to concentrated acids and alkalis, as well as numerous organic solvents. Furthermore it has extremely low moisture adsorption, ...