- Production - Materials - Metrology >
- Materials - Semi-finished products >
- Plate polyamide
Plate polyamide
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Operating temperature: 65 °C - 120 °C
... applications, and ideal replacements for materials ranging from bronze to rubber. Our comprehensive range of semi-crystaline polyamide materials includes special formulations for demanding applications requiring extremely ...
Mitsubishi Chemical Advanced Materials
Operating temperature: 230 °C - 450 °C
Duratron® PAI is a family of the highest performing, melt processable plastics, characterized by superior resistance to elevated temperatures. These plastic grades are capable of performing under severe stress conditions at continuous ...
Mitsubishi Chemical Advanced Materials
Operating temperature: 230 °C - 425 °C
Semitron® PAI is a portfolio of polyamide imide materials developed for extremely demanding applications in semiconductor and electronic device manufacturing, such as high voltage ranges, high temperatures, and vacuum ...
Mitsubishi Chemical Advanced Materials
Length: 5 mm
Width: 1 mm
Thickness: 2.5 mm - 5.4 mm
These glass-mat reinforced PA and PP panels were developed as lightweight substitutes for aluminum, steel, and plywood. GMT materials consist of long fibers and/or endless glass fiber mats manufactured in a proprietary ...
Mitsubishi Chemical Advanced Materials
Length: 5 dam
Width: 1 mm
Thickness: 2.5 mm - 5 mm
... additional reinforcement for GMT panels. GMTex® high-performance thermoplastic composites consist of a polypropylene or polyamide resin matrix that is reinforced with both woven and randomly laid fibers. This multi-layer ...
Mitsubishi Chemical Advanced Materials
... friction strips, conveyor screws, bushes, spindle, nuts, cam discs, rope pulleys, castors, impact plates,damping plates. Size - 0.019″–3.937″ Material - PA 6 Standard - ASTM-D-4066, ...
Thickness: 0 mm - 100 mm
Diameter: 6 mm - 320 mm
Nylon Type 6 extrudedGeneral purpose grade. Tough and mechanically strong. Good impact and wear resistance. Colour:- NaturalSize range:-Rod - 6 to 320mm diameter.Sheet - 0.3 to 100mm thick.Tube - 25 to 260mm outside diameter; 3.5 to 65mm wall.
Tufnol Composites
Thickness: 10 mm - 100 mm
Diameter: 50 mm - 500 mm
Improved hardness and stiffness. High compressive and flexural strengths. Colour:- WhiteSize range:-Rod - 50 to 500mm diameter.Sheet - 10 to 100mm thick.Tube - 50 to 6O0mm outside diameter; 10 to 185mm wall.
Tufnol Composites
Thickness: 2 mm - 50 mm
Diameter: 4 mm - 200 mm
Nylon Type 66 extrudedHighest temperature resistance. Excellent stiffness and hardness. Lower impact strength. Machines better than Type 6 extruded. Colour: IvorySize range:-Rod - 4 to 200mm diameter (or ground to size}.Sheet - 2 to 50mm ...
Tufnol Composites
Thickness: 20 mm - 50 mm
Diameter: 20 mm - 125 mm
Highest temperature resistance. Excellent stiffness and hardness. Lower impact strength. Machines better than Type 6 extruded. Colour: NaturalSize range:-Rod - 20 to 125mm diameter.Sheet - 20 to 50mm thick.Tube - Subject to special enquiry.
Tufnol Composites
Thickness: 8 mm - 100 mm
Diameter: 10 mm - 500 mm
Self-lubricating nylon with non-toxic lubricant built-in during casting. This lubricant becomes an integral part of the material and will not spin, drain or dry out. Conventional nylons are excellent bearing materials but the oil filled ...
Tufnol Composites
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how AeroExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining