Face milling cutters

Diameter: 20 mm - 63 mm

Max depth of cut 4 mm (0.157 inch) Recommended slotting depth of cut 2 mm (0.079 inch) Insert corner radii range 0.4-0.8 mm (0.016-0.031 inch)

Max depth of cut 4.5 mm (0.177 inch) Recommended depth of cut 3 mm (0.118 inch) 4 cutting edges, single-sided inserts

Diameter: 63 mm - 200 mm

Face Mill Series, Insert with 14 Cutting Edges Wedge type for cast iron Extra fine ~ super extra fine pitch Screw in type for all materials Coarse and fine pitch IDEAL FOR ROUGHING AND FINISHING ON SMALL AND LOW ...

Diameter: 40 mm - 80 mm
Length: 50 mm - 100 mm

Cutter for high efficiency machining of titanium Productivity increase by high metal removal rates 3 chip breakers for lowest cutting resistance Corner radius from 1.2 mm ~ 5.0 mm available Arranging ...

Diameter: 40 mm - 125 mm
Length: 40, 50, 63 mm

Face milling cutter for multiple materials Features and benefits Internal coolant supply.

Diameter: 32, 25 mm

Face milling cutter for multiple materials Features and benefits Internal coolant supply.

Diameter: 50.8 mm - 254 mm
Length: 44.45 mm - 60.97 mm

Face Mill • Cast Iron Machining Features and benefits Milling cutters for cast iron and compacted graphite iron (CGI) machining. Ideal for roughing of engine heads ...

Diameter: 50 mm - 250 mm
Length: 63.03, 40.03, 50.03 mm

Face Mill • Cast Iron Machining Features and benefits Milling cutters for cast iron and compacted graphite iron (CGI) machining. Ideal for roughing of engine heads ...

Diameter: 152.4, 76.2 mm
Length: 44.5, 60.3 mm

Shell Mills Features and benefits Precision Coolant Technology (PCT). Coolant delivery exactly to cutting area. Increased heat transfer. Improved chip control.

Diameter: 43 mm - 180 mm
Length: 63.5, 50.8, 63 mm

Face Mills Features and benefits Use PCT technology, coolant through the insert. Engineered to provide the maximum performance in titanium machining. Anti-rotation feature enables up to six indexables rotations. Pocketing, ...

Diameter: 31.75, 25.4 mm
Length: 31.75, 38.1 mm

Screw-On End Mills Features and benefits For machining high-temp alloys, PH stainless, stainless steels, and hardened materials. Excellent productivity through massive reduction of machining time. Face ...

Diameter: 15.87 mm - 38.1 mm
Length: 74.93 mm - 139.7 mm

Cylindrical End Mills Features and benefits For machining high-temp alloys, PH stainless, stainless steels, and hardened materials. Excellent productivity through massive reduction of machining time. Face ...

Diameter: 50.8, 63.5, 76.2, 101.6 mm
Length: 50.8 mm

First choice for face milling high-temp alloys and hard or hardened materials up to 60 HRC. Excellent productivity through massive reduction of machining time.

Diameter: 38.1 mm
Length: 101.6 mm

First choice for face and shoulder milling high-temperature alloys. Higher material removal rate due to fine pitch cutters. Secure clamping system, improving process stability and reliability. Effective ...

14 cutting edges per indexable insert Stable, negative indexable inserts Optimum support face and high feed per tooth thanks to solid carbide shim High depth of cut Positive, soft cutting action Benefits for you: Extremely ...

Face milling cutter with a 15° approach angle Four-edged system inserts in three sizes Wave-form finish along the flank face facilitates the choice of geometry Benefits ...

Ti50 high-performance milling cutter 0.55 x D Flexible ConeFit changeable head system Can be used for finishing the base of pockets up to 7 x D New design for ideal transitions when carrying out base ...