Booster units for the aeronautical industry

Pressure: 325 psi - 750 psi

... psi is required. To achieve 750 psi, a 150 psi supply is required. 150 psi is the maximum input pressure the unit should be subjected to. The unit is purely a mechanical device and has no electrical requirements. Applications Applications ...

Pressure: 85 psi - 1,500 psi

... psi shop air drive System consists of a 4 to 1 primary stage pressure booster Each pump is controlled by a high flow regulator Description The Model 74 Low Pressure Booster generates 1500 psi Nitrogen ...

Pressure: 7 bar

This Oxygen booster station is dedicated to MRO Workshop or Tests room to supply one or manytest benches with Oxygen. It consists of oxygen booster and a buffer frame equipped with 4 ...

Pressure: 16 bar

MAXIMATOR Air Amplifier type MPLV: Selected pressure boosting upstream of individual consumers. Zero energy consumption after final pressure is attained. No electrical installations are required, i.e. suitable for use in explosion-proof areas

Pressure: 16 bar

MAXIMATOR Air Amplifier type SPLV: Selected pressure boosting upstream of individual consumers. Zero energy consumption after final pressure is attained. No electrical installations are required, i.e. suitable for use in explosion-proof areas

Pressure: 16 bar

MAXIMATOR Air Amplifier type GPLV: Selected pressure boosting upstream of individual consumers. Zero energy consumption after final pressure is attained. No electrical installations are required, i.e. suitable for use in explosion-proof areas

Pressure: 40 bar

MAXIMATOR-Air Amplifier type MPLV-4, Inlet filter with shut off valve, Pressure storage 0,75 liter Drain valve, The Station is complete assembled, tested and ready for connection. Pressure ratio: 1:4 Utilities: Air Flow ...

Pressure: 21 bar

MAXIMATOR Air Amplifier type SPLV3, Air inlet filter type BSP 1/2", Pressure regulator type BSP 1/2", Non-return valve type BSP 1/2", Accumulator pressure gauge 0-40bar (100), Accumulator shut-off valve type BSP 1/4", Pressure outlet ...

Pressure: 60 bar

Pressure ratio - 1:5 Discharge (psi) - 870 Air Drive Pressure min. (bar) - 1 Air Drive Pressure min. (psi) - 14.5 Air Drive Pressure max. (bar) - 10 Air Drive Pressure max. (psi) - 145 Noise level max. (dB(A)) - 79 Weight (kg) ...

Self powered gas boosters to service high pressure on-board nitrogen filling and charging of carbon dioxide or helium cylinders used for the inflation of escape chutes and life rafts, and to service other components needing ...

Pressure: 5,000 psi

The Haskel oxygen hand booster has been developed for the manual charging of life support and resuscitation cylinders in areas where there is no power supply (electrical or compressed air) available The hand booster ...

Pressure: 145 psi - 2,900 psi

Haskel Helium / Nitrogen Gas Booster System centers around a Haskel 8” Drive Air driven Gas booster compressor capable of delivering high pressure and high flows of gas to enable optimum completion of ...

Pressure: 2,000 psi - 15,000 psi

... process requiring a continuous flow that can only be obtained by cascading multiple cylinders of gas Not only will a Haskel Gas Booster or packaged system allow you to use 90 to 95% of the gas in your purchased cylinders, ...

Pressure: 250 psi - 2,500 psi

... The basic booster is two-stage: rated for continuous duty compression ratios of over 15:1, intermittent to 40:1. A pneumatic control package continually monitors both inlet cylinder pressure and outlet receiver pressure, ...